思科双线路接入方案,思科两个路由器怎么配置

(一地址配置) r1(config)#int f0/0 r1(config-if)#ip add 61.153.177.1 255.255.255.0 r1(config-if)#no shut %LINK-5-CHANGED: Interface FastEthernet0/0, changed state to up r1(config-if)#int f0/1 r1(config-if)#ip add 192.168.1.1 255.255.255.0 r1(config-if)#no shut r1(config)#int s1/0 r1(config-if)#ip add 112.55.33.1 255.255.255.0 r1(config-if)#no shut 电信r1(config)#ip route 0.0.0.0 0.0.0.0 61.153.177.3 网通r1(config)#ip route 113.55.33.0 255.255.255.0 112.55.33.11 r1(config)#ip route 114.55.33.0 255.255.255.0 112.55.33.11

二(NAT配置) r1(config)#int f0/0 r1(config-if)#ip nat outside r1(config-if)#exi r1(config)#int s1/0 r1(config-if)#ip nat outside r1(config-if)#end NAT地址池 r1(config)#ip nat pool wt 112.55.33.5 112.55.33.5 netmask 255.255.255.0 r1(config)#ip nat pool dx 61.153.177.2 61.153.177.2 netmask 255.255.255.0 配置两个route map Route-map isp2 permit 10 Match ip address 100 Match int s1/0 Route-map isp1 permit 10 Match ip address 100 Match int f0/0

本文出自 “施志华IT达人show” 博